T & P Cell - Notices

T & P Cell - Notices

This is with reference to Campus 2022 Hiring!

Glad to inform you that TECH MAHINDRA would be sending the Campus On-line test links for Round-1 to the Eligible students today.

On-line test link will be enabled on 16th Feb’22 11 AM and will be valid till Sunday 20th Feb’ 22 – 11 PM.

The test link will be sent to the students directly for taking the virtual On-line test from Mettl system. 

They will receive the mail from admin.mettl@mercer.com.

Test Details -
•	Online assessment [Apti , English essay] (in proctoring mode)
Test Duration – 90 minutes
Eligible students are required to follow the below guidelines for taking the test.
Important test guidelines for the students –

•	Test will be the PROCTORED one
•	Students Keep Govt photo ID (AADHAR card, Passport or Driving License) ready to confirm your identity before start of the test
•	Test will NOT be supported on Mobile Devices (Eg. Cellphone / Smartphones / Pads / Tablets).
•	Test can only be taken on webcam enabled Laptop / PC
•	Complete system compatibility test (Process shared in Test Invitation mail from admin@mettl.com in advance before the on-line test.
•	You will be monitored throughout the test via webcam. So, please make sure that your webcam is connected and functional.
•	Your image and movement would be captured periodically till the end of test. If we observe that you are defocussed or away from your seat, then your candidature would stand cancelled.
•	Navigation away from the test window will lead to termination of the test.
•	Forwarding this mail or sharing the test link with anyone else will lead to cancellation of your candidature.
•	Candidates clearing the on-line test will only be contacted via Training and Placement Officer / concerned college or Univ authority for the further process

Please contact +91-08047190902 of Mettl helpdesk or write to support@mettl.com if the students are facing any technical issue while taking the test


Sd/-
T & P Office

Download: Notice Attachment

Dear Student,

Go through the attached notice on subject mentioned above.


sd/-
Placement Office.

Download: Notice Attachment

                                                     Schedule of Plianto Technologies drive

Plianto Technologies recruitment drive is scheduled on 16-02-2022. Hence the following list of students need to gather at Training and Placement Office (Besides Girls Hostel) by 10:30 AM on the day to attend the preplacement talk, followed by written test at Training & Placement Test Centre, AB-III, First floor.

Note:
1.	As per requirement of the company MALE candidates only eligible for the drive.
2.	Students to carry their updated resume along with a passport size photo.

List of the eligible registered MALE candidates for the recruitment drive

Sl.No.	Id. No.	Student_Name	Gender	Branch
1	B151841	SURARAPU RAVITEJA	Male	CE
2	b161011	GODISHALA THIRUPATHI	Male	CE
3	B161126	GORRE VAMSHI	Male	CE
4	B161186	PYARASANI RAKESH	Male	CE
5	B161360	ARE HARISH KUMAR	Male	CE
6	B161407	OGGARI HARIKRISHNA	Male	CE
7	B161530	MOLUGU SANDEEP	Male	CE
8	B161540	POOJARI SAI PRASAD	Male	CE
9	B161624	VADDE SURESH	Male	CE
10	B161799	DURGAM ANAND KISHORE BABU	Male	CE
11	b161888	KARNE SAIRAM	Male	CE
12	B162207	MALOTH RAHUL	Male	CE
13	b161474	KOTA PRANEETH	Male	CSE
14	B161676	KOTHAPALLI RUPHUS JOHN	Male	CSE
15	B161697	GHACHI RAVINDER	Male	CSE
16	B161292	BONAGIRI SIDDHARTHA	Male	ECE
17	B161310	S NARASIMHA	Male	ECE
18	b161377	ENDURI RAHUL	Male	ECE
19	B161402	VAJJA VAMSHIKRISHNA	Male	ECE
20	B161725	KENAM SAI TEJA	Male	ECE
21	B161748	MOHAMMED SAAD	Male	ECE
22	B161855	PANGA HARISH	Male	ECE
23	b162039	MD.NAVAZ SHAREEF	Male	ECE
24	B161032	JELLAKA RAMCHARAN	Male	EEE
25	B161120	GORANTLA SUMANTH BABU	Male	EEE
26	B161172	KANCHARLA SUMANTH	Male	EEE
27	B161278	POTHANA BHANUPRAKASH	Male	EEE
28	B161285	GANDHAM SHIVAKRISHNA	Male	EEE
29	B161370	INAPA PRADEEP KUMAR	Male	EEE
30	B161532	PENAGARI SAGAR	Male	EEE
31	B161536	MARKANTI GANGA MOHAN	Male	EEE
32	B161873	GOLE SANJAY	Male	EEE
33	B161268	MOODU NAVEEN	Male	ME
34	B161366	VALUSA RAJESH	Male	ME
35	B161852	LOKANDE AMBADAS	Male	ME
36	b151570	MATAM MAHESH	Male	MME
37	B151910	RATHOD HARI	Male	MME
38	B161218	SHIVANEETHIWAR SRIKANTH	Male	MME
39	B161243	B SURESH	Male	MME
40	B161247	AMBATI SHARAN	Male	MME
41	B161685	LAKKAKULA RAKESH	Male	MME

Sd/-
T&P Office

Download: Notice Attachment

Virtusa WE CODE - An Exclusive Hackathon for Women in tech

WE Code short for Women Empowerment Codeathon is an exclusive initiative to promote diversity & inclusivity by hunting the best in talent for Virtusa

By taking part in this competition, you can get a kickstart to your career in the IT industry by being a part of Virtusa

Eligibility Criteria
Final year student from
BE/B.Tech/MCA – CS / IT / ECE / IS / EEE  Branches.

60% throughout the academics
starting 10th until degree

Year of Graduation – 2022

Important Note!
This is an individual team member event for Stage 1 & Stage 2 and hence all the candidates to register themselves separately

For the Timeline of the competition go through the attached notice.

Register at: https://rb.gy/6ric1k by 14-02-2022

Sd/-
T&P Office

Download: Notice Attachment

Greeting from Training & Placement, RGUKT, Basar…!

It is hereby informed to the current E3, E2 & E1 students that the INFOSYS would like to conduct the HackWithInfy 2022 for all the branches of current E3 (B17 Batch), E2 (B18 Batch) & E1 (B19 Batch) students. 

The details are as follows:

HackWithInfy provides the perfect stepping-stone for B.E./ B. Tech/ M.E./ M. Tech students to explore their interest in programming and an opportunity to compete and win exciting prizes. The top performers will also earn a chance to work with Infosys.
 
This year, HackWithInfy is not just open to the batch of 2023, but we are also inviting participation from 2024 and 2025 batch, to prove their mettle and win exciting cash prizes worth INR 3.5 Lakhs.
 
HackWithInfy competition offers –
 
•	A chance to compete with top programmers in India
•	Cash prizes worth INR 350,000 to the winners
•	Pre-placement interview for niche technical roles at Infosys
•	Paid internship opportunities
•	Chance to become Infosys Campus Ambassador

HackWithInfy 2022 comprises two rounds -
 
1.	Round 1: March 6,7, and 8, 2022
An online individual participation round on the Infosys platform. Students can choose their slots on the portal, post registration. Slots will be assigned on first come, first serve basis.

They can take this assessment in either of the following languages –
Bash, C, C++ (14), C#, Clojure, Go, Java, JavaScript, Perl, PHP, Python, Python3, R, Ruby, Swift, and TypeScript.
 
2.	Final round: July 1 – July 4, 2022
In this round, the top 100 participants from Round 1 will be divided into teams for a 48-hour hackathon.
 
Please visit the HackWithInfy website (https://www.infosys.com/careers/hackwithinfy.html) for more details.
 
Registrations for HackWithInfy 2022 are now open to all B.E./B. Tech/M.E./M. Tech students graduating in the years 2023, 2024, and 2025.
 
Steps of the registration process:
1.     Students need to first become a registered user on InfyTQ, (https://infytq.onwingspan.com/en/infytq-login) our learning and engagement platform

2.     Once registered, go to the ‘HackWithInfy’ page under the ‘Programs’ tab OR click on the HackWithInfy banner at the top of their InfyTQ homepage

3.     Carefully read the instructions and click on the checkbox to accept the terms and conditions shared on the page and select ‘REGISTER NOW’
 
The last date to register for HackWithInfy 2022 is Monday, Feb 14, 2022.
 
We expect all the students to carefully read the Terms and Conditions and the Privacy Notice for HackWithInfy 2022 before they register.

Infosys will consider registration on InfyTQ by a student as an acceptance of these terms and conditions.
							
Sd/-
T & P Office
Placed candidates at Key Cube Technologies off-Campus Recruitment drive

*** Hearty Congratulations***

Sl.No.	Id. No.	Name of the Student	Branch
1	B161739	AYESHA HUMERA	CHEM
2	B162163	BHASHANAPELLY CHANDANA	CHEM

Sd/-
T&P Office

Download: Notice Attachment

The following students have selected for the recruitment drive of CoMakeIT.

S. No	ID No.	Name of the Student
1      	B161565	MUNAGALA SUMASREE
2      	B161918	PAVANGOPI BILAVATH

“HEARTY CONGRATULATIONS”
	
Sd/-
T & P Office

Download: Notice Attachment

It is hereby informed to all the final year students that, the ADEPT CHIPS would like to conduct recruitment drive for ECE branch of 2022 graduates for the roles of VLSI & Embedded.

Interested candidates are required to register in the below link by 11th February 2022 (separate registration for both the roles).

Registration Link: http://tnp.rgukt.ac.in/login.php
 
Role                         :	Associate Software Engineer
Qualification            :	B. Tech. ECE
Year of Graduation  :	Final year students (2022)
Percentage Criteria  :	7 CGPA and Above (throughout academics)
CTC                          :	3.6 LPA , Periodic annual revision of 1.2 LPA based on performance post 
                                        completion of 1 year till 3 years bond completion
Bond                        :	3 years’ service agreement
Work Location         :	Hyderabad/Visakhapatnam/Bangalore
Website                   :	www.adeptchips.com

Sd/-
T & P Office

URL: Click Here

Download: Notice Attachment

Dear Student,

The following selected students of INNOMINDS for the role of JAVA & UI need to report to Placement Office (Administrative Building) by 11:15AM.  

Go through the attached notice for the selected list.

sd/-
Placement Office.

Download: Notice Attachment

Job Announcement of COSMICLABS

COSMICLABS would like to conduct recruitment drive for CSE, ECE & ME graduates of 2022 for three roles. Interested and eligible students apply at http://tnp.rgukt.ac.in/login.php by 9-02-2022.

1.	Blockchain Engineer - We are looking for students that have an interest and hands-on experience with blockchain and are willing to offer between 3.6LPA to 5LPA (can go up to 6LPA if the selected candidate is exceptional) as a starting package based on projects worked on, past experience with open source contributions, projects that are live now and more.

2.	Application Engineer - We are also looking to hire for the role, which starts as an Application Developer but based on performance/competence, will eventually shift to blockchain. This role will work with web2 & web3 applications and we will mostly need candidates with experience in JavaScript (frontend & backend) with the package starting at 3.6 LPA.

3.	Testing Engineer - Finally, we are looking for folks with high attention to detail from a testing perspective and this role will also start at 3.6LPA due to the effort involved in automation, optimization and writing simulators for various blockchain environments.


Sd/-
T&P Office

Download: Notice Attachment

Dear Student,

It is hereby informed to all shortlisted students of Innominds interview that the Virtual Interview is scheduled on 7th Feb 2022.

Interview Link and Scheduled timings will be shared to your Email id's.

sd/-
Placement Office.
It is hereby informed to the 2022 graduates that the TECH MAHINDRA would like to conduct Phase-2 of campus Hiring for all eligible candidates passing out in 2022, who were not the part of Phase-1.

JOB DESCREPTION:

Academic Eligibility –

•	Qualifying courses – BE/B.Tech -  Comp Science / Comp Engineering / IT / E&C / E&TC / Telecom / Communication or MCA or M.Sc. (Computer / Comp Science / IT)
•	Candidate should have passing out qualifying course in 2022 without any active backlog
•	Should have scored min. of 60% in SCC/10th, HSC/12th /Diploma (in case done) and BE/B.Tech/MCA   
•	Not more than 1year gap since SSC and that too not after joining a course. Means, no loss of academic year after joining a course.
Selection Process –

•	Candidates meeting the academic eligibility will be invited for on-line Aptitude Test, English Essay/Story, Tech Test, Psychometric test, Technical and HR Interview with each of these acting as filter for next stage on selection process.
•	All rounds will be conducted virtually.
•	Test/Interview links will be shared with the eligible candidates directly through a mail.
Bond and Compensation –
On selection- 

•	Candidate will be on probation for 6 months with a CTC of INR 2.6 L /annum
•	On completion of probation, candidate will be offered a CTC of INR 3.25 L/annum
•	Candidate will have to sign an indemnity bond for INR 1 L for a mandatory period of service of 2 years from date of joining the company
Note – During probation candidate will undergo unit specific classroom training / on-the-job-training / shadowing / all as per the business requirement. 
 
Work Place & Timings –
Candidate should be willing to work

•	At any of the TechM Development Center’s or Client Locations spread across country/globe
•	In any projects including development, Application Support and Maintenance, Testing, Managed services etc.
•	As per the company specified work timings including shift working 





Joining Location –

Anywhere in India though we will try our level best to accommodate candidates at the respective location.
Please note, the processes are system driven, hence we will not be able to accommodate any changes/additions to this list after the last date.

Interested candidates are required to register in the given below link by 07th February 2022.

Registration Link: http://tnp.rgukt.ac.in/login.php


Sd/-
T & P Office

URL: Click Here

Download: Notice Attachment

It is hereby informed to the 2022 graduates that the TECH MAHINDRA would like to conduct Phase-2 of campus Hiring for all eligible candidates passing out in 2022, who were not the part of Phase-1.

JOB DESCREPTION:

Academic Eligibility –

•	Qualifying courses – BE/B.Tech -  Comp Science / Comp Engineering / IT / E&C / E&TC / Telecom / Communication or MCA or M.Sc. (Computer / Comp Science / IT)
•	Candidate should have passing out qualifying course in 2022 without any active backlog
•	Should have scored min. of 60% in SCC/10th, HSC/12th /Diploma (in case done) and BE/B.Tech/MCA   
•	Not more than 1year gap since SSC and that too not after joining a course. Means, no loss of academic year after joining a course.

Selection Process –

•	Candidates meeting the academic eligibility will be invited for on-line Aptitude Test, English Essay/Story, Tech Test, Psychometric test, Technical and HR Interview with each of these acting as filter for next stage on selection process.
•	All rounds will be conducted virtually.
•	Test/Interview links will be shared with the eligible candidates directly through a mail.

Bond and Compensation –
On selection- 

•	Candidate will be on probation for 6 months with a CTC of INR 2.6 L /annum
•	On completion of probation, candidate will be offered a CTC of INR 3.25 L/annum
•	Candidate will have to sign an indemnity bond for INR 1 L for a mandatory period of service of 2 years from date of joining the company
Note – During probation candidate will undergo unit specific classroom training / on-the-job-training / shadowing / all as per the business requirement. 
 
Work Place & Timings –
Candidate should be willing to work

•	At any of the TechM Development Center’s or Client Locations spread across country/globe
•	In any projects including development, Application Support and Maintenance, Testing, Managed services etc.
•	As per the company specified work timings including shift working 

Joining Location –

Anywhere in India though we will try our level best to accommodate candidates at the respective location.
Please note, the processes are system driven, hence we will not be able to accommodate any changes/additions to this list after the last date.

Interested candidates are required to register in the given below link by 07th January 2022.

Registration Link: http://tnp.rgukt.ac.in/login.php


Sd/-
T & P Office

URL: Click Here

Download: Notice Attachment

Laksh Semiconductors would like to conduct recruit drive for ECE & EEE graduates of 2022. Interested and eligible students register at given G-form link in the following notification.

The company is offering a training cum placement program for efficient graduates who have completed their engineering in ECE & EEE with 80% and above from our college in 2022. They offer Tr. Physical Design position for freshers based on your performance after the training program.  

First 6 months of training 
1.	The stipend of Rs. 7,500/- P.M. will be paid during the training program.
2.	The company will pay Rs: 1,47,500/- to Seminds for your training expenses.
3.	After successfully completion of training program salary will be Rs: 3,00,000/-
4.	You will have to sign an employment agreement for 3 years 6 months (including the first 6 months). 
 
The screening test will be conducted for shortlisted candidates on 13th Feb 2022.
•	Interviews will be conducted from 14th to 15th Feb 2022 for shortlisted candidates.
•	Offers will be issued on 21st Feb 2022 
•	His/her joining date will be Feb 28th 
•	Training Venue:  Virtual Training  

Prerequisites:
1.	B. Tech in ECE/EEE. With an aggregate percentage: 80+
Entrance Exam: 10 am, 13th Feb 2022. (Online)
Entrance Exam Syllabus: 
Basic & Digital Electronics, Number systems, Combinational Circuits, Sequential Circuits, BJT, FET, CMOS etc. General aptitude.
Duration: 90 Minutes.
Registration link:
https://docs.google.com/forms/d/e/1FAIpQLSc1ZspBvStTtw4DGh57PmQwqJMXF1evG4lsHzJKb6K3_X54sw/viewform?usp=sf_link

Sd/-
T&P Office

Download: Notice Attachment

Dear Student,

It is hereby informed to all shortlisted students that the shortlisted students need to submit their resume for Innominds Interview by today(i.e. 03.02.2022, 4:00PM).

Note: Submit your resume in given format( Ex: B16XXXX_Name of the Student).

Resume Link:  https://forms.gle/zqQumyadDGpUubo18

sd/-
Placement Office.

Download: Notice Attachment

Dear Student,

It is hereby informed to all registered students of Polmon that the registered students need to submit their latest resume by tomorrow(i.e. 03.02.2022, 10:00AM).

Link for resume submission: https://forms.gle/8HLjVAVEmsipxCjf7

sd/-
Placement Office.

Dear Student,

There are 3 Sections in INNOMINDS Campus Assessment Round:

# Section A: Aptitude Test  -  25 Minutes | 25 Marks | 25 Questions

# Section B: Reasoning and Communication Test - 25 Minutes | 25 Marks | 25 Questions

# Section C: Technical Test - 25 Minutes | 25 Marks | 25 Questions

Note: Link & access details shared to your Email  id. 

20 Minutes Login Window shall be provided i.e From 6:00 PM to 6:20 PM. ( No student will be allowed to enter after 6:20 PM )

You can attempt any ONE TEST matching the role that you further want to pursue. 

* PUNCTUALITY IS MUST
* MAKE SURE TO HAVE CONSISTENT INTERNET CONNECTION
* YOU WILL GET FULL TIME, ONCE YOU ENTER THE TEST (within the login window)

Read the Instructions carefully:
NO NEGATIVE MARKING

While writing the answers you and your answer sheet should be visible in the camera. While appearing from mobile, position your mobile in a way that you are visible to the proctor.

IMPORTANT INSTRUCTIONS: Read carefully before starting

USE ONLY Google Chrome Browser
ENSURE your Webcam and Mic are working
TO ENSURE your Webcam and Mic are not engaged by another app, try the following:
CLOSE / EXIT all other open apps
CLEAR Browser History and Cache
OPEN in Incognito Mode
RESTART your computer
GIVE PERMISSION to use Webcam and Mic when prompted
Anti Cheating Mechanism

This exam is smartly protected by two anti cheating mechanisms:

Lock and Track: Locks and tracks any browser deviations
ImageRaid: AI based intelligent image capturing
Use of Headphones is strictly PROHIBITED. If found in the video, your performance would be canceled.
No other application should be open while giving the exam.
Your video and audio are being recorded. Your screen activity is also being recorded.
Any malpractice will be reported as a flag and you could be barred from this exam.
Examples of a violation:

Minimizing the browser or exiting full screen mode
Deviation from the current browser tab
Attempt to Google out answers
Trying to Copy Paste content
Use of keys like Ctrl, Cmd, Esc & Alt
Additional faces and objects in the camera
Your face not visible in camera
Speaking or background noise
Unnecessary eye movement 
These violation messages will be displayed on-screen and also recorded in your performance report.

Important Please Note

In case of internet connection / network disruption: Do Not Panic! Don't Escape, Don't Refresh, Don't click on FINISH or Close the Browser Window.
If your internet connection goes off during the exam, you will see the message that you're offline. Don't panic, keep giving the exam as normal. The exam will still finish on time and all your activities will still be recorded.
Keep the browser window open. Once the internet is back, your remaining answers, activity and video recorded while offline will be uploaded and synced automatically. But donot refresh or click on Finish while offline.
All your previous answers, activity and video, before the disruption, was already recorded in real time and we would have it with us on your report.
After reaching a specific number of violations allowed, you will be automatically logged out and barred from the exam.

All the Best

sd/-
Placemen Office
Dear Student,

It is hereby informed to the registered students of S2Tech recruitment drive that the Pre-Assessment Talk is scheduled on today .i.e.(1st Feb 2022),5:00PM. Link for Pre-Assessment talk will be shared to your Email id’s.

sd/-
Placement Office.
Dear Student,

ZOHO CORPORATION would like to conduct recruitment drive for 2022 passing out students. Interested students need to register in given link by 2nd Feb 2022,2:00PM.

Eligibility Criteria: -

Branches: Any Stream (Passion towards programming is our only criterion).
Job Role: Software Developer
CTC: Salary packages offered will be 5.6 LPA or 7 LPA or 8.4 LPA based on their performance in the interview process.
Job Location: Chennai

Interview process:
1.	L1- Aptitude round
2.	L2- Programming round
3.	L3- Advanced programming and problem-solving skills round
4.	L4 - Technical interview 
5.	L5- HR interview
 
Job Description:
1.	Design and develop high-volume, low-latency applications for mission-critical systems, delivering high availability and performance.
2.	Contribute to all phases of the product development lifecycle.
3.	Write well-designed, testable, and efficient code.
4.	Ensure designs comply with specifications.
5.	Prepare and produce releases of software components.
 
Registration Link: http://tnp.rgukt.ac.in 

Last Date for Registration: 2nd Feb 2022,2:00PM.

sd/-
Placement Office

Download: Notice Attachment