Dear Students,
Hall Ticket Distributing for E1,E4 and E3 (Only Civil Engg Department) , so all CRS of above mentioned respective  Year and branches students come to ABII-105 to collect your respective classrooms students Hall Tickets. 

Dear Students,

PFA for PUC Games Notice.

Download: Notice Attachment

It is here by informed to all PUC-2 girls that the food will be served at new mess hall starting from Breakfast on 30.07.2023 and all the PUC-2 boys should continue as usual at old mess hall.
Sd/-
ADSW

Dear Students,

 This is to bring to your attention that, for the AY_22-23_E1S2_EST_(Reg)_Oct23 examination hall tickets will be distributed to the concerned class representatives on 2ndOct-23 (Monday) at AB-II Room No:105 from 4:30PM-5:30 PM. All concerned class representatives must collect their hall tickets within the specified time period and make sure that every  student have hall ticket with them while appearing for the examination.

Hall Tickets for remedial mode examinations will be distributed tomorrow at 9:30 AM.

Note: Students having hall tickets with no photos printed on them, must attach the passport sized photo on the hall tickets and get it stamped at the examination counter prior to the examination. It is mandatory to have a photo on your hall ticket, and failure to do so may result in not being allowed to appear for the exam.

Wishing you all the best for your upcoming exams.

Dear students,
As per the instructions of the Honourable Vice Chancellor and the Director,  the Examination section is planning to conduct Re-remedial Examinations for those students of B20-Batch who got backlogs in both the semesters of PUC-II (P2S1 and P2S2).Following are some instructions regarding the Re-remedial Examination.

The Re-Remedial examinations will be conducted from 26-11-22 to 03-12-22.
The Registration Fee is Rs 500/- per course.
The Registration Link for the same will be opened from 22-11-22 to 24-11-22.
Students of B20-Batch who cleared all the subjects, but are not eligible for Branch Allocation (got CGPA less than 6.00) may appear for the above said examination to improve their grades as a one time measure.

Sd/-
Controller of Examination

This is to inform all the concerned PUC-1 first year year students (AY 2021-2022 SEM 2) that the PUC 1 Physics end semester lab examinations would be conducted from 26th July to 03rd August 2022. All the students should submit the record books at the time of lab examination, students should bring their identity cards with them and must report on time as per their respective schedule shared in the attachment below.

Date of the Examinations: 26th July to 03rd August 2022
Time of the Examination: 8:00 am to 6:30 pm
Venue: PUC LABS OLD BLOCK

The Exam pattern is as follows :

Do the experiment given on the day of examination and provide the details of the experiment as below : This would carry 40 Marks
 
To be written in this sequence
1. Aim
2. Apparatus required
3. Formula and model graphs
4. Principle/Theory
5. Observation Table
6. Procedure
7. Calculations
8. Result 
9. Precautions

Viva Voce - 20 Marks - During the experiment as per the schedule.
 
The Schedule and the breakup of students is shared below (attachment).

Best wishes to all the students for the examinations.

Download: Notice Attachment

Dear Students,

Please find attached AY 2016-17 E1 Sem1, E2 Sem1and E3 Sem1- Monthly Test-1 Time Table scheduled on 02.09.2016 and 03.09.2016.

Download: Notice Attachment

Download: Notice Attachment

This is to inform all the E2,E3 and E4 NSS Volunteers and others if interested, can also register in the following link for Blood Donation.

Find the link below.

Registration Open for  MosChip Technologies Recruitment Drive
Dear Students,
We are pleased to announce the MosChip Recruitment Drive for Graduates of the 2025 batch.

Embedded and Digital fresher hiring for 2025 
Job Description I:  Read Here
Recruitment for Core SW - ESW & SW Design

MosChip is looking for BE/BTech Final Year Students (going to be passed out) with Electronics or Computer Science as one major stream (ex: CSE, ECE, EEE, EIE Branches) for our requirement to Embedded Software and Software Product Design Teams. Selected students will work on the development of Embedded Software or Product Software which is a dream job for many Computer Science Engineers. The minimum eligibility criteria for writing the examination are that the student must have obtained an overall percentage of minimum 60% marks till now. 

The Selection Process follows Three Steps as described below. 

Step1: Preliminary Examination (Online), An objective type of online examination for 90-minute duration consisting of questions from Aptitude, Processors and Programming domains. The exam must be conducted at the College premises. The students who clear the Preliminary Examination will be called for writing the Main Examination.

Step2: Main Examination (Physical Paper), The Main examination consists of two papers (Embedded SW and Programming) that must be answered by all Students. The Embedded SW section paper is for 90 minutes duration and Programming Section paper for 90 Minutes duration. Students who clear the Main Examination will be called for interview to finalize selection. 

Step3: Interview. The interview is to find out the technical passion of the student. It will be a day long interview to check candidates’ skill and interest in ESW and Programming domains. The idea of the interview is to hand hold and guide students in discovering their area of interest and passion. 

 
ESW Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design the embedded software for various types of Boards that are made to test different applications. Typically, they may work on the following types of applications    
    
•	Video and Audio Processing Boards
•	AI/ Edge related Applications
•	Simple embedded applications for commercial use
•	Various development boards for ASICs
•	Various evaluations boards for ASICs
•	Embedded boards for Auto industry applications
•	Industrial sector based embedded applications


Software Product Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design Software Products based on Standards. Typically, they may work on the following product applications    
    
•	DLMS Stack Development
•	WiFi/USB/Bluetooth/PCIe like Protocol Software
•	Application Software for simple embedded applications
•	App development on Mobiles
All Selected students who wish to join must abide by 
1.	Will undergo 6 months training at MISS in their respective domain
2.	Every Student must sign a bond for 4 ½ years including training period to serve the company
3.	Any student who wishes to break the bond before a 4 ½ year term must pay 8 Lakhs 
4.	Salary will be decided based on performance during Training

Job Description II:  Read Here

Recruitment for Core Electronics - VLSI Analog Design & Digital Design

MosChip is looking for BE/BTech Final Year Students (going to be passed out) with Electronics as one major stream (ex: ECE, EEE, EIE Branches) for our requirement to Analog Design and Digital Design Teams. Selected students will work on product (ASIC) and IP development, which is a dream job for many Electronics Engineers. The minimum eligibility criteria for writing the examination are that the student must have obtained an overall percentage of minimum 60% marks till now. 

The Selection Process follows Three Steps as described below. 

Step1: Preliminary Examination (Online), An objective type of online examination for 90-minute duration consisting of questions from Aptitude, Analog and Digital domains. The exam must be conducted at the College premises. The students who clear the Preliminary Examination will be called for writing the Main Examination.

Step2: Main Examination (Physical Paper), The Main examination consists of two papers (Analog and Digital) that must be answered by all Students. The Analog section paper is for 90 minutes duration and Digital Section paper for 90 Minutes duration. Students who clear the Main Examination will be called for interview to finalize selection. 

Step3: Interview. The interview is to find out the technical passion of the student. It will be a day long interview to check candidates’ skill and interest in Analog and Digital domains. The idea of the interview is to hand hold and guide students in discovering their area of interest and passion. 

 
Analog Design – Salary Range: 6-8 Lakhs - Job Description:
Candidates will have the opportunity to design varieties of analog design blocks based on the products they work for in the Company. Candidates will get an opportunity to work on multiple technologies, across multiple Foundries like TSMC 4nm/5nm/12nm/22nm/65nm/90nm/180nm, GF 22FDX/12nm/40nm, etc... Typically, they may work on the following Blocks    
    
•	Analog-to-digital converters (ADC)   
•	Digital-to-analog converters (DAC)   
•	Phase-Locked Loop (PLL), DPLL 
•	Serializer, De-serializer (Serdes)   
•	Clock and data recovery (CDR) circuits   
•	Comparators, Threshold detectors
•	Regulators, Power Management Circuits
•	BGR, Bias Generators, Switching Circuits, Amplifiers


Digital Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design varieties of Digital design blocks based on the products they work for in the Company. Candidates will get an opportunity to work on multiple technologies, across multiple Foundries like TSMC 4nm/5nm/12nm/22nm/65nm/90nm/180nm, GF 22FDX/12nm/40nm, etc... Typically, they may work on the following Blocks    
    
•	Industry Standard Protocol Based Designs
•	Digital Designs that need to work with Microprocessors
•	Algorithm Implementations
•	Filters Designs
•	Computation Designs
•	SoC Related Designs
•	Building Design Verification Environment
•	Designing BFMs, Checkers, Models etc..

All Selected students who wish to join must abide by 
1.	Will undergo 6 months training at MISS in their respective domain
2.	Every Student must sign a bond for 4 ½ years including training period to serve the company
3.	Any student who wishes to break the bond before a 4 ½ year term must pay 8 Lakhs for Digital and 10 Lakhs for Analog Domain 
4.	Salary will be decided based on performance during Training

How to Apply:
Interested and eligible students can apply through the following link: Apply Here https://forms.gle/pDz3TuAEj4Etzehq6


⏳ Deadline: April 25, 2025.

Training & Placement Office
RGUKT-Basar

Download: Notice Attachment

We are pleased to announce an important update regarding the Summer Internship Program. In response to requests from students and institutions, we have extended the application deadline to May 27th, 2025, til 5:00 PM. This extension allows additional time for all interested candidates to prepare and submit their applications.

About Summer Internship:

Undergraduate and postgraduate students and research scholars in recognized universities or institutions in India and abroad can apply for the India Space Lab Summer Internship. Participants will work closely with various verticals, divisions, and cells of Space and receive training in Drone Technology (Air Taxi), CanSat and CubeSat (Student Satellite), Rocketry, Remote Sensing (GIS), Space Entrepreneurship, Astronomy and in addition space webinar. Applicants must apply online by completing the registration form.

Public Notice:

Registration Link: https://isl.internship.indiaspaceweek.org/internship_form/

Online Summer Internship Technical Training Module: DAYS (June 15th - July 30th)

I)    3 Days of Advanced Drone Technology (Air Taxi): June 15th to June 17th
II)   3 Days of CanSat and CubeSat (Student Satellite): June 20th to June 22nd
III)  3 Days of Rocketry Training Program: June 25th to June 27th
IV)   3 Days of Remote Sensing ( GIS) Sessions: June 30th to July 1st
V)    3 Days of Space Astronomy Sessions: July 5th to July 7th
VI)   3 Days of Space Entrepreneurship Sessions: July 5th to July 7th
VII)  Project focused on Technology and Official Works: July 8th to July 17th
VIII) 2 days of Disaster Management sessions : July 20th to July 21st

**) Space Webinar: Space Education & Employment, 27th July

Important: Individuals who join through lateral entry will not be classified as part of the Internship. Instead, they will receive a certificate upon completing the training program.

Lateral Entry : India Space Lab is pleased to announce an opportunity for officials, faculty, research scholars, and students to engage in lateral entry into their preferred technology areas. This initiative does not involve an examination process. Participants will receive a training certificate upon completion rather than an internship certificate.

Lateral Entry Registration: https://isl.internship.indiaspaceweek.org/lateral_entry/

We look forward to your participation and engagement in the India Space Lab (भारत अंतरिक्ष प्रयोगशाला) - Summer Internship Program with Comprehensive Training (Space Education and Employment for All Students, @Viksit Bharat 2047).

Kindly disseminate this information to all students, faculty members, and research scholars.

Affiliation Regulatory Authority(India Space Week)
India Space Lab(भारत अंतरिक्ष प्रयोगशाला)
Director Office (निदेशक कार्यालय)
Email:  contact@isl.ac.in/ info@isl.ac.in

Download: Notice Attachment

Dear Students, 

The Below students should consult the Examination Section pertaining to the Regular Examination Registration on or before 3:15 PM today. If the below students have not cleared their registrations, they will be restrained from issuing hall tickets.
E2:
B192714
B192190
B192607
B192332
B192293
B191536
B191760
B191638
B192083
E3:
B181055
B181129
B181185
B181191
B181624
B182016
B182032
B182070
B182557
B182591
B182608
B182640

All the creative minds of RGUKT, this is a call for you to join the Decoration team.
   So come forth with your creative ideas and become a part of ANTAHPRAGNYA-2K18.



Date: 28-01-2018 to 31-01-2018
Time: 10:30a.m to 5:30p.m
Venue: AB1-303
For more details please contact:
Ph: 9989825781

Dear Student,


Teach for India recruitment drive is scheduled on 30-1-17(i.e. today) at AB-I Auditorium at 11:30AM.

sd/-
Placement cell

Dear Students, 
It informs you that Students who are allotted to Nizamabad for live casting duty ready to go tomorrow Morning at Sharp 7 AM. Buses are available at ABII building. 

Note1: carry with fully charged laptops, adapters, Adobe flash media player software, windows OS 

Note2: Please come with Windows OS and needed software (For user guide PPT and Adobe live recorder software go throw the following link 

https://drive.google.com/drive/folders/1oHDGdDnrV5Awut1x97Q8tno57vmN5eDu?usp=sharing

Download: Notice Attachment

Dear Students,

It is hereby informed to all E4 MME students that the Ramky Group conducting pool drive  for E4 MME 2018 passing outs along with Civil & Mechanical students. Interested students need to register in hub.

This is only for Male Students of Civil, Mechanical & MME.

Tentative Schedule of drive:  17th to 19th April 2018.

Eligibility Criteria:

1) Minimum 60% of aggregate.
2)Interested to work at anywhere in India.
3)Interested to work as Intern for first 3 months with Rs 7000/- stipend(including food and accommodation).
4)Ready to give undertaking for 5 years.

Last date for registration: 13 - April 2018, 06:00PM.

Note: Interested Students should register before 6:00 PM Today.

sd/-
Placement Office

Dear Students,

Please find attached Revised AY 2016-17 E1 Sem1, E2 Sem1and E3 Sem1- Monthly Test-1 Time Table scheduled on 02.09.2016 and 03.09.2016.

Download: Notice Attachment