Dear Students,

Please find the attachment of subject cited above.

For further details regarding class room allocation please contact in Academic Section.

Regards,
Academic Section

Download: Notice Attachment

Department of Metallurgical and Materials Engineering (MME),  cordially invites all the Faculty, Staff, Students and the Guests  to visit the exhibits by MME students and get a glimpses of treating and shaping of "Metals, Medals and Environment (MM&E)" as part of "ANTAHPRAGNYA 2020" from 31st January to 2nd February 2020 in Department Block. 

Timings:


On 31-01-2020  Afternoon 2:00 PM to 5:00 PM (after inauguration)


On 01-02-2020  and 02-02-2020 :9:30AM to 1:00 PM &

2:00 PM to 6:00 PM

Registration Open for  MosChip Technologies Recruitment Drive
Dear Students,
We are pleased to announce the MosChip Recruitment Drive for Graduates of the 2025 batch.

Embedded and Digital fresher hiring for 2025 
Job Description I:  Read Here
Recruitment for Core SW - ESW & SW Design

MosChip is looking for BE/BTech Final Year Students (going to be passed out) with Electronics or Computer Science as one major stream (ex: CSE, ECE, EEE, EIE Branches) for our requirement to Embedded Software and Software Product Design Teams. Selected students will work on the development of Embedded Software or Product Software which is a dream job for many Computer Science Engineers. The minimum eligibility criteria for writing the examination are that the student must have obtained an overall percentage of minimum 60% marks till now. 

The Selection Process follows Three Steps as described below. 

Step1: Preliminary Examination (Online), An objective type of online examination for 90-minute duration consisting of questions from Aptitude, Processors and Programming domains. The exam must be conducted at the College premises. The students who clear the Preliminary Examination will be called for writing the Main Examination.

Step2: Main Examination (Physical Paper), The Main examination consists of two papers (Embedded SW and Programming) that must be answered by all Students. The Embedded SW section paper is for 90 minutes duration and Programming Section paper for 90 Minutes duration. Students who clear the Main Examination will be called for interview to finalize selection. 

Step3: Interview. The interview is to find out the technical passion of the student. It will be a day long interview to check candidates’ skill and interest in ESW and Programming domains. The idea of the interview is to hand hold and guide students in discovering their area of interest and passion. 

 
ESW Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design the embedded software for various types of Boards that are made to test different applications. Typically, they may work on the following types of applications    
    
•	Video and Audio Processing Boards
•	AI/ Edge related Applications
•	Simple embedded applications for commercial use
•	Various development boards for ASICs
•	Various evaluations boards for ASICs
•	Embedded boards for Auto industry applications
•	Industrial sector based embedded applications


Software Product Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design Software Products based on Standards. Typically, they may work on the following product applications    
    
•	DLMS Stack Development
•	WiFi/USB/Bluetooth/PCIe like Protocol Software
•	Application Software for simple embedded applications
•	App development on Mobiles
All Selected students who wish to join must abide by 
1.	Will undergo 6 months training at MISS in their respective domain
2.	Every Student must sign a bond for 4 ½ years including training period to serve the company
3.	Any student who wishes to break the bond before a 4 ½ year term must pay 8 Lakhs 
4.	Salary will be decided based on performance during Training

Job Description II:  Read Here

Recruitment for Core Electronics - VLSI Analog Design & Digital Design

MosChip is looking for BE/BTech Final Year Students (going to be passed out) with Electronics as one major stream (ex: ECE, EEE, EIE Branches) for our requirement to Analog Design and Digital Design Teams. Selected students will work on product (ASIC) and IP development, which is a dream job for many Electronics Engineers. The minimum eligibility criteria for writing the examination are that the student must have obtained an overall percentage of minimum 60% marks till now. 

The Selection Process follows Three Steps as described below. 

Step1: Preliminary Examination (Online), An objective type of online examination for 90-minute duration consisting of questions from Aptitude, Analog and Digital domains. The exam must be conducted at the College premises. The students who clear the Preliminary Examination will be called for writing the Main Examination.

Step2: Main Examination (Physical Paper), The Main examination consists of two papers (Analog and Digital) that must be answered by all Students. The Analog section paper is for 90 minutes duration and Digital Section paper for 90 Minutes duration. Students who clear the Main Examination will be called for interview to finalize selection. 

Step3: Interview. The interview is to find out the technical passion of the student. It will be a day long interview to check candidates’ skill and interest in Analog and Digital domains. The idea of the interview is to hand hold and guide students in discovering their area of interest and passion. 

 
Analog Design – Salary Range: 6-8 Lakhs - Job Description:
Candidates will have the opportunity to design varieties of analog design blocks based on the products they work for in the Company. Candidates will get an opportunity to work on multiple technologies, across multiple Foundries like TSMC 4nm/5nm/12nm/22nm/65nm/90nm/180nm, GF 22FDX/12nm/40nm, etc... Typically, they may work on the following Blocks    
    
•	Analog-to-digital converters (ADC)   
•	Digital-to-analog converters (DAC)   
•	Phase-Locked Loop (PLL), DPLL 
•	Serializer, De-serializer (Serdes)   
•	Clock and data recovery (CDR) circuits   
•	Comparators, Threshold detectors
•	Regulators, Power Management Circuits
•	BGR, Bias Generators, Switching Circuits, Amplifiers


Digital Design – Salary Range: 4-6 Lakhs - Job Description:
Candidates will have the opportunity to design varieties of Digital design blocks based on the products they work for in the Company. Candidates will get an opportunity to work on multiple technologies, across multiple Foundries like TSMC 4nm/5nm/12nm/22nm/65nm/90nm/180nm, GF 22FDX/12nm/40nm, etc... Typically, they may work on the following Blocks    
    
•	Industry Standard Protocol Based Designs
•	Digital Designs that need to work with Microprocessors
•	Algorithm Implementations
•	Filters Designs
•	Computation Designs
•	SoC Related Designs
•	Building Design Verification Environment
•	Designing BFMs, Checkers, Models etc..

All Selected students who wish to join must abide by 
1.	Will undergo 6 months training at MISS in their respective domain
2.	Every Student must sign a bond for 4 ½ years including training period to serve the company
3.	Any student who wishes to break the bond before a 4 ½ year term must pay 8 Lakhs for Digital and 10 Lakhs for Analog Domain 
4.	Salary will be decided based on performance during Training

How to Apply:
Interested and eligible students can apply through the following link: Apply Here https://forms.gle/pDz3TuAEj4Etzehq6


⏳ Deadline: April 25, 2025.

Training & Placement Office
RGUKT-Basar

Download: Notice Attachment

Dear Student,

Infosys Would like to conduct recruitment drive for the technical roles of Specialist Programmer & Digital Specialist Engineer for 2023 passing out students. Interested & Eligible students need to register by 7th July 2022,2:00PM.

Registration Link for Infosys: https://forms.gle/3Uk7tbEgtLmn14XBA


Details of Job:-
Eligible Branches: CSE ,ECE & EEE
Job Role: Specialist Programmer & Digital Specialist Engineer
CTC: The compensation for Specialist Programmer role is INR 9.5 lakhs per annum and for Digital Specialist Engineer role it is INR 6.25 lakhs per annum.
Academic Criteria & Instructions: Go through the attachments mentioned below


Note:-
1. Read the placement policy and if you have any queries/ doubts kindly approach the T&P office, once enrolled you have to abide by the policy as mentioned. 
2. The Placement policy attached with this drive is one-time measurement, the policy holds good for all the placement activities.
3. Its mandatory to register in the portal which would be shortly opened for registrations.                                                                                                                                                        

sd/-
T & P Office

Download: Notice Attachment

Here is the list of Allotments for E-QUIZ by ECE department.

NOTE: Spot registrations are also available
please find the attachment below

Download: Notice Attachment

Dear Students,

Go through the attached notice of Epam recruitment process for 2019 & 2020 passouts.



sd/-
Placement Office.

Download: Notice Attachment

Dear Students,

Please find the attachment for the subject cited above.

Sd/-
Academic Section.

Download: Notice Attachment

Please Find the attachment for the subject cited.

Download: Notice Attachment

Dear Students, 
Please find below attachment. 


Sd/-
 
Deputy Registrar 
Rgukt-Basar

Download: Notice Attachment

On the Eve of 15th August Celebrations @ RGUKT-Basar
The Department of English is conducting the following events:

1.	Essay Writing:    
Date: 14-08-2023
Venue: Humanities Building
Time: 5pm to 7pm
Theme:  Waste Management & Creative Ideas on converting it into reusable energy. 
Contact:  A.Vijay Kumar- 8500993380) D. Vasantha Babu – 8309669367) & R. Gajendar- 9912971868) 

2.	Elocution  
Date: 14-08-2023
Venue: Humanities Building
Contact:  G.Shankar - 9603504172) & K. Venkateshwarlu- 9392308909), A. Sreenivas – 8886928964)
Time: 5pm to 7pm
Theme:  Great leaders & patrons sacrificed for India’s Independence 

3.	Art (Drawing) 
Date:  14-8-2023
Venue: Humanities Building
Contact:  (I.Lakuma Devi (Cell: 9908113043 & K. Krushna Prasad (Cell: 8328263106)
Time:  5pm to 7pm
Theme:  Nation first, always first
Drawing Necessities - colors, paints, drawing sheets (students should get them)
Note: Students can draw their paintings in their respective hostels and submit the final copy on the given deadline. 

4.	Best Documentary
Date:  from: 10-8-2023 to 14-8-2023
Venue: Humanities Building
Theme: save energy, water, electricity, and challenges in the contemporary society.  
Contact:  Dr. S. Shravan- 9989567467) & U. Prabhakar Rao – 7893438977), A. Gangadhar.
Submission: by 14th Afternoon. 

Eligibility: Any student (PUC-I & II & Engineering can participate in any of the aforementioned events.

Registration Open for Earthful Recruitment Drive
Dear Students,
We are pleased to announce the Earthful Campus Recruitment Drive for graduates of the 2025 batch.
Please find the Job Description here:
Job Profile on offer: 
•	Job Designation: TECHNICAL ASSOCIATE
•	Place of Posting : HYDERABAD
•	Job Description: Earthful is looking for talented individuals to join our technical team, working on high-impact projects at the intersection of engineering, data analytics, and operations. This role offers hands-on experience in process optimization, automation, and product development, helping drive efficiency and innovation in the health and wellness industry.

Why Join Us? 
•	Work directly with the founders and senior leadership on real-world technical challenges.
•	Apply engineering principles, data analytics, and automation to improve operations.
•	Gain exposure to R&D, supply chain management, and manufacturing processes.
•	Lead and contribute to strategic technical projects, from new product development to process optimization.

Roles & Responsibilities
•	Collaborate with R&D, manufacturing, and supply chain teams to optimize production processes, quality control, and cost efficiency.
•	Use data analytics, automation, and process modeling to drive operational improvements.
•	Conduct technical feasibility studies for new product development and scaling production.
•	Research and integrate emerging technologies such as predictive analytics and AI-driven process automation.
•	Assist in designing workflow improvements and automation solutions for production and supply chain efficiency.
•	Support the development of data dashboards and performance monitoring systems to track business and technical KPIs.




Who Can Apply?
•	Final-year engineering students.
•	Strong problem-solving and analytical skills, with an interest in process optimization, manufacturing efficiency, and data-driven decision-making.
•	Hands-on experience with Excel, SQL, Python, or data visualization tools is a plus.
•	Ability to analyze technical data, interpret trends, and propose improvements.
•	Proactive and entrepreneurial mindset, with the ability to work independently and take ownership of projects.
•	Strong communication skills for effective collaboration with cross-functional teams.

Salary Details:
•	Cost to Company (Rs. In lakhs per annum) : minimum 3 LPA TO 3.6 LPA (BASED ON SKILLS AND EXPERIENCE)
•	Training / Probationary period : 6 MONTHS

Selection Procedure:
•	Shortlist from Resumes
•	Written Test: SCENARIO BASED CASE STUDIES 
•	Personal Interview
•	Technical Interview 

How to Apply:
Interested and eligible students can apply through the following link: Apply Here https://forms.gle/R6Zts9ct3C4m7So47

⏳ Deadline: March 18, 2025, 12:30 PM.

Training & Placement Office
RGUKT-Basar

Download: Notice Attachment

Download: Notice Attachment

M.Tech I-Year Sem1 End Semester Examinations Time Table

Download: Notice Attachment

                                                   Registration Open for GRIDLEX Campus Recruitment Drive
Dear Students,
We are pleased to announce the GRIDLEX Campus Recruitment Drive for CSE, ECE, and EEE graduates of the 2025 batch.
Eligibility Criteria:
•	Minimum CGPA: 6.0 & above
Job Details:
•	Designation: Software Developer
•	Location: Hyderabad
•	Technologies: Python, Django, MySQL
•	Internship: 6-month program with a stipend of ₹20,000 per month
•	Full-time Offer: ₹4.2 LPA, based on performance during the internship
Required Skills:
•	Python
•	Django/Flask
•	MySQL
(Candidates from other streams with the mentioned skills may also apply.)
Selection Process:
1.	Coding Rounds
2.	Technical Interview
3.	Personal Interview
How to Apply:
Interested and eligible students can apply through the following link: https://forms.gle/8dVg4hkxPPuGAdsd7 

⏳ Deadline: February 6, 2025, 2:00 PM

Training & Placement Office
RGUKT-Basar

Download: Notice Attachment

Will be easy?.....Nope!!! worth it?...... absolutely !!!!
Knock out the boredom......
Its time to test your talent & skills.........
              The Department of ECE welcomes you to take part in the most awaiting event CIRCUIT PUZZY  going to be held on 20-2-2018 during 5pm-7pm and crack exiting technical puzzles and problems.
REGISTER BY -1:00PM 20-2-2018(TUESDAY)
FOR REGISTRATION SEND YOUR ID’S TO:
7674943640
9177205167

Download: Notice Attachment

The following ID students should report to the Chief Warden office by tomorrow (18.11.2022) 5:00 PM without fail.

B211116
B211239
B210231
b210770
b210992
b211745
b210219
b210523
b210194
b210831
b211834
b210371
b210674
b211276
B210284
B210360
B210039
B211192
B210248
B211798
B211711
B211403
B211421
B211545
B211216
B211565
B211221
B211111
B211017
B211632
B211818
B210174
B210425
B210521
B210376
B211030
Note: Failing to report to the Office, action will be initiated against those students.

Dear E2 Chemical Engg. Students,

Please find AY 18-19 Sem-1 External Organic Chemistry Lab Schedule.  Lab Exam will be held in the AB-I Third Floor (Chemistry Lab) on 15/11/2018

Best wishes
Dr.Ravi Varala

Download: Notice Attachment

 It is hereby informed to all the students that the registration link for working models is activated in AntahPragnya website.Last date for registration is 28-02-2017 (i.e. on Sunday).

Note: Only registered students will get the participation certificates.	
						       
Please find the registration link below.